Valves Using Tungsten Carbide Ball 6mm

Valves Using Tungsten Carbide Ball 6mm

Description:

Tungsten Carbide Ball 6mm are widely used in ball valve and bearing. We can offer

various grades and sizes. And the requirements of each procedure are stringent

to ensure that the products produced must comply with your request. We adopt

the advanced technical. The ball has the high endured causticity and high endure

grind, which could improve the life of the bearing, while elevate the value of

your products.

Details: 

Specifications:	ISO K10 and K20 are most common
Material Composition	Typical Material composition is
	6% Cobalt
	94% Tungsten Carbide
	But other compositions are available with Cobalt content up to 25%. Hardness reduces and toughness increases with increasing cobalt content.
Hardness	1500 to 1600 HV
Corrosion Resistance	Cobalt binder material is reasonably resistant to corrosion. The Cobalt binder will corrode in contact with water, but the effect is largely cosmetic in that the balls loose their polished appearance, with little effect on performance. De-ionised water does pose a more severe problem, as it can tend to promote 'leeching' of Cobalt from the binder. Erosion of the binder can be a problem when in contact with abrasive particles as may occur in some valve and pump applications.
Special Properties	Hardness if retained to approx. 800 degrees Celsius. Balls can be brazes to steel stems to allow mounting, or hole may be produced by spark erosion.
Availability	Balls are made in a wide range of sizes from 0.4mm to 100mm and can be made in larger sizes.
Applications	Valves, Pumps, Ball Screws, Measurement Standards, Gauging, Wear Parts.
General Information	Cobalt Binder Tungsten Carbide is in many ways an ideal material for ball production. Its hardness and stiffness allows the production of extremely accurate balls, with very fine control of final size. The material is extremely stable and these properties make Tungsten Carbide Balls and ideal choice for reference standards in metrology. Equally, the same properties make the balls and ideal choice for all applications where wear rates need to be low.

Specifications:  

Tungsten Carbide Ball 6mm are widely used in ball valve and bearing. We can offer various grades and sizes. And the requirements of each procedure are stringent to ensure that the products produced must comply with your request. We adopt the advanced technical. The ball has the high endured causticity and high endure grind, which could improve the life of the bearing, while elevate the value of your products.

Material Composition

Typical Material composition: 6% Cobalt, 94% Tungsten Carbide.

But other compositions are available with Cobalt content up to 25%. Hardness reduces and toughness increases with increasing cobalt content.

Corrosion Resistance

Cobalt binder material is reasonably resistant to corrosion. The Cobalt binder will corrode in contact with water, but the effect is largely cosmetic in that the balls loose their polished appearance, with little effect on performance. De-ionised water does pose a more severe problem, as it can tend to promote 'leeching' of Cobalt from the binder. Erosion of the binder can be a problem when in contact with abrasive particles as may occur in some valve and pump applications.

Note: various diameter and size combinations can be

supplied at customer's request.  

Display:

 

Q:What is cemented carbide ?

 A:Cemented carbide is a hard material used in machining tough materials such as carbon steel or

stainless, as well as in situations where other tools would wear away, such as high-quantity

production runs. Most of the time, carbide will leave a better finish on the part, and allow faster

machining. Carbide Tools can also withstand higher temperatures than standard high speed steel tools.

 

 

 

Contact us if you need more details on Tungsten Carbide Ball 6mm. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Tungsten Carbide Ball 6mm、Tungsten Carbide Ball 6mm. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Tungsten Carbide > Tungsten Ball